Osmo Polyx Original Hard Wax Oil

From £28.75 List Price £31.93
In stock
SKU
41-40-54-87
  • Long-lasting and durable 
  • Perfect for preserving wooden floors and furniture 
  • Dirt-resistent  
  • Enhances the natural colour of the wood 
  • Resistant to common liquid spillages such as water, coffee, tea, juice and wine 
  • Saliva-resistant and sweatproof 
  • Breathable finish 
  • No sanding needed for future applications 

Why use Osmo hardwax oil?

Osmo hardwax oil is a transparent wood finish product that uses an effective combination of natural plant oils and waxes to provide protection for your wooden floors and furniture. It is both water and dirt resistant meaning the wax oil will give long-lasting protection to any wooden surface it is applied on. The natural wax helps smooth down the surface of the wood, leaving it looking silky smooth for years to come. 

Osmo hardwax oil is ideal for the protection of:

  • Wooden floors
  • Solid wood
  • Wooden planks
  • Cork flooring, 
  • Wooden furniture surfaces, such as tables, cabinets, chests of drawers etc.

What are the advantages?

Osmo hardwax oil provides a range of benefits for homeowners and DIY enthusiasts. Smooth, protect and upgrade any piece of wooden furniture in your house. Some of the main advantages of Osmo wax oil are:

  • Natural plant ingredients
  • Environmentally friendly 
  • Simple application 
  • Enhances the natural tone of the wood
  • Long lasting – surface will not peel, flake or crack over time 
  • Highly resistant to all types of liquids, such as water, cola, wine, coffee and tea.
  • Gives a clear or transparent finish
  • Provides increased protection and sheen to your wooden surfaces

How to apply Osmo hardwax oil

Ensure the wooden floor or surface is dry and cleaned before application. You may need to clear any old stains and remove old paints and varnishes before applying, otherwise, the finish will not be as smooth or as effective. Fill in any holes or cavities before applying. Sand down the surface well and clean the sanding dust with a vacuum before any oil is applied. 

Shake your Osmo wax oil well before use. 

Begin the application by using a flat brush or roller to lightly apply oil to your wooden surface. Spread the oil well and make sure it is well ingrained into the wood in a smooth finish instead of in lumpy pools or blotches. After the Osmo hardwax oil has been properly applied, allow the oil to dry in a well-ventilated area. Only apply your second coat once the first coat has fully dried. The Second coat does not need to be thicker or thinner than the first, just a repeat of the initial process. 

Use a maximum of 2 coats on raw wood. You can always add another coat later down the road if you feel you need to. 

Once both coats have dried you should be left with a smooth, well-protected wooden surface. Ensure the oil has fully dried before touching, walking-on or handling the floor or wooden surface. Typical dry time is up to 24 hours, but may be less if the wood is left in a well-aired area.

Write Your Own Review
Write a ReviewOsmo Polyx Original Hard Wax Oil